If you mix green and yellow colors in equal proportions, you get a color that we usually call light green. Depending on how light or dark the original colors are, the result will vary from light green to olive.

But if you mix green and yellow in clothes, nothing good will come out) This combination can only be worn by representatives of the winter color type, and even then it’s not worth it)

If you take yellow as a base and add green paint, then we get light green color or shade, since everything will depend on the amount of paint you want to add to the base color.

If you want to continue the experiment, you can add a little white paint to the light green one and get a lighter and less saturated color.



Yellow will give green the opportunity to play the most different shades. There will be less yellow - the green will only become slightly brighter, more golden, but if there is more, then it will be possible to increase green color to light green. In general, decide what color you want to get as a result - more yellow or more green, and depending on this, select the desired proportion of mixed colors.

Light green color can be used to paint fresh grass and leaves. It will give the picture a juicy spring character.

Mixing green and yellow dyes will also be useful for cooks: it is this light green color that is most often found on flower petals on cakes.



If you mix any two paints, you can get many different shades. Moreover, depending on how much of one paint is mixed with another, the resulting color approaches either one or another color.

If we have two colors: yellow and green, then color mixing in equal proportions will give light green color.

If you gradually add green paint to yellow paint, you can see how the resulting paint changes its color, getting closer to green with each new drop.

Knowing how to get a particular color correctly, you can create completely unexpected shades. And if you add yellow and green paint one more color, then you can get, for example, the following colors:



The answers to this question will be different if you do not ask the exact characteristics. The final color when mixing yellow and green depends on their initial shades and saturation. This can be clearly seen from the figure below.



If we mix light green and light yellow, we get a soft light green color.

If we mix rich green and yellow, we get a rich light green color.

If we mix dark green and dark yellow, we get olive color. It can also be intensified to dark olive.

By the way, in life the combination of yellow and green is quite acceptable, for example, in clothes these colors go well together and refresh a woman, and are also acceptable for a man, although they are used less often. The same can be said about their use in the interior of, say, a bedroom.





It will turn out to be an acidic, poisonous light green color - well, that’s just in my personal opinion!)

If you mix yellow and green, you get Blue colour. Depending on the proportions of the colors mixed, the shade of blue will change. If you add more green, you get a dark blue color. And if yellow color and if there is more, it will turn out blue.

Mixing green with any other colors always results in a color close to brown or even an indeterminate color.

But adding green to yellow dates olive color. If you add just a little yellow, the green color will become more saturated and dark.





By mixing yellow and green colors, we get bright light green color.

But in order to actually get a bright light green color, the proportions when mixing paints must be the same 1:1.

By adding a little more of one color and a little less of another color you can get different colors from brown to dark blue and from blue to light blue.

Mixing green and yellow colors will result in a light green color. different shade depending on the proportions of these colors. Up to olive color. In general, to put it simply, it will just be a light green color.

It depends in what proportions you mix yellow and green. If the proportions are the same 1:1, then you will get a light green color. Depending on the increase in any color, the shade will change. For example, more yellow, the color will become light green and vice versa.

When choosing paint for the interior, even for watercolor paintings, it is easy to make a mistake with the shade. Paper testers may not match the tone in reality.

Don't worry, there is a way to achieve the desired shade! Read on to find out what paints to mix to get blue.

In contact with

Creating a classic shade

Unfortunately, no matter what components are mixed, without the primary tone itself it will not be possible to even come close to creating the required shade .

Red and yellow colors follow the same rule.

If the color in your palette is too dark, then white paint will help to lighten it a few tones.

If, on the contrary, you need to darken the shade, then you need to add more dark tones to the mixture - black, gray or brown.

Important! If you are mixing colors to create a small pattern in the interior, then you can mix them in a small bowl by hand. If you want to paint an entire wall, tint the ingredients in a bucket using a mixer.

How to maintain proportions

How to get blue color by mixing:

1. Get delicate ultramarine by mixing blue and white parts in a 3:1 ratio.
2. To create a shade with a slight blue, increase the portion of white color. The ratio of blue to white is 2:1.
3. To obtain a more transparent, light tone, mix them in equal proportions.

WITH Hello! The heavenly color is perfect for painting a boy’s nursery.

A turquoise tone will help you get a more saturated heavenly tone.

A complex recipe from three ingredients will help create a sea green color. How to make blue using turquoise and white? Take 2 parts blue paint, 1 part white and turquoise. Enjoy the blue of the sea.

This is interesting! Red, blue, yellow are called primary, because by mixing other tones it is not possible to achieve the desired shade. Why do you need to know what colors need to be mixed to make blue? To achieve a play of shades and original texture, create artistic masterpieces.

Dark shade

In the case when you want to make the color darker, the mixing recipe is a little more complicated. It all depends on what the final result is and how rich the tone you are trying to achieve. How to successfully mix different tones to get a dark blue color:

1. You will need two paints: black and aquamarine. If the tone is made to decorate parts, then stir the mixture with a brush or stick in a small container. To paint walls, you need to tint the shade with a construction mixer, a special attachment for an angle grinder.
2. There are no exact proportions. Add black color to the base paint drop by drop or a few milliliters.
3. It is better to test the resulting mixture on a sheet of white paper and let it dry. If you are satisfied with the shade, then stop tinting. If not, add even more black.

Advice! Did it get dark? Lighten the mass by several tones using white. Stir in gradually so you don't have to add black again.

Violet

Ultramarine is similar to artificial, which does not occur in nature. Purple will help create paint the color of a dark sky. Magic coloring will help create an interesting tone that can be used to paint the ceiling in the nursery, and bright luminous star stickers will create an imitation of the night sky. How to get blue from purple:

1. Mix blue paint with purple in proportions 3:1.
2. For the ceiling, knead the dye with a construction hook for about 10 minutes.
3. Test the finished mixture on a small section of the wall. Do not forget that you need to apply the interior color in 2-3 layers.

A woman's favorite shade is royal ultramarine.

To get such a noble tone on the verge of night blue and sea wave, you need an acidic violet color or pink. The recipe is similar to the previous tinting:

1. You will need 2 tones: acid violet (pink) and ultramarine.
2. The proportions of blue and pink are 3:1. Sometimes you need a little more pink.
3. Evaluate the result by applying the dye to a small area.

Advice! To get purple, mix red and blue in equal proportions.

From yellow

To create an emerald blue color based on ultramarine, you need yellow. The resulting shade is similar to glitter precious stones. It is appropriate to use it for decorating small elements to create a fantastic picture. How to get blue from yellow:

1. Mix yellow and ultramarine colors in equal parts.
2. For a pastel look, add white. The proportion recipe depends on the desired degree of pallor.

Advice! To create a fantastic shimmery color, do not stir the paint too thoroughly. A lazy tinting method will create an interesting mother-of-pearl effect.

From green

Prussian blue is a favorite of designers not only for interior design, but also for clothing.

The deep color is associated with the depths of the sea and a distant galaxy. How to easily turn green into blue:

1. We combine two colors: aquamarine and green in equal parts.
2. Mix using a technique to ensure uniform texture.

Surprisingly, when adding a third white ingredient, the color does not fade.

How to make paint the right shade

What if there is no main color, but you need to make blue paint? An interesting tone, similar to sapphire shine, is obtained by mixing red and green. This tinting will not give pure ultramarine, but by adding black and white paint you can achieve interesting and unusual shades.

Useful video: how to mix colors

Combine combinations of warm shades with delicate pastels, blue tones with cold ones. Change the proportions to your liking; proper tinting is the key to successful repairs. Experiment and create your own color scheme!

Red and green combined give a dark Brown color. But its shade and intensity depend on the chosen proportions. the main role in this combination belongs to the color green. The darker it is and the greater the proportion used, the more intense the brown color, even black.

If you mix blue and green, what color will you get?

Blue and green - we get the color of turquoise or sea wave. The more intense the blue tone, the more dominant it will be in the shade, approaching turquoise. The predominance of green makes the shade of sea wave greenish. With an equal proportion of colors, a rich blue tint is obtained.

If you mix yellow and green, what color will you get?

Combining yellow and green, we get a light green or light green tone. In order for it to work out, the proportions of the colors must be the same. By adding green to yellow, we get an olive tint; if there is very little yellow, we get deep green with a blue tint, that is, it all depends on the proportion.

In addition, primary colors can produce many other shades. For example, when combining red and blue you get purple. Which, depending on the proportion we use, can range from a light, almost transparent lavender shade to a rich purple. Yellow and red produce a vibrant orange hue.

Advice! If you try to mix all three main shades at the same time, you will get an indefinite dirty brown color with a blue tint, it is called complex.

By experimenting with primary colors, taking into account the basic rules of color, you can achieve any desired shade.

How to mix colors - video

The paint mixing table allows you to create a huge palette of bright shades from 3 basic colors. It is very exciting! The main thing is to choose the right paints according to the color mixing table.

Artist's Workshop: Magic Lessons

1. The combination of two adjacent colors of the spectrum produces shades with different intensities of these colors. For example, yellow and orange when superimposed produce yellow-orange or orange-yellow, depending on which of these 2 colors predominates. If you mix in equal proportions 3 shades located next to each other on the color wheel, for example, yellow, red and orange, you will get the same orange, but dirtier.

2. When white is added to any color, it produces pastel shades of varying intensities.

3. By mixing 2 primary colors in equal proportions, which are separated by 1 shade on the color wheel, we get exactly the intermediate color that separates them. For example, red + blue = purple.

4. An equal combination of 2 contrasting colors (located opposite each other on the color wheel) always produces gray with a tint of one of these colors. For example, red + green, blue + orange, etc. Interestingly, if you mix complementary colors in a 2/1 ratio, you get absolute gray (without additional shades).

5. 3 primary colors located next to each other, when applied in equal proportions, also form gray, for example, green + yellow + orange. Pay attention to the striking pattern: harmonious color combinations (which you can get using the color wheel) when mixing those included in them give shades grey colour- balancing, they absorb each other.

Creating new colors using a paint mixing table

As we already know, there are only 3 colors that cannot be obtained by mixing others. But from them you can create all other shades. These magical colors are red, yellow and blue. By the way, by mixing them with each other in equal proportions, you can get black. How to create all the other shades of the palette, see the table:

The color mixing table and color wheel are used not only in painting, they are simply irreplaceable when tinting and mixing decorative plaster in construction, in perfumery and soap making, when dyeing fabrics, batik, etc.

Color spectrum: revealing the secrets of the rainbow

Isaac Newton, passing light through a prism, received a multi-colored beam called a spectrum. For the convenience of combining colors, a continuous line of the spectrum with all its transitional tones was turned into a circle. As you know, in the color spectrum there are three primary shades (red, blue and yellow), and when they are mixed in pairs with each other, three more secondary shades are obtained (green, orange and purple). It is these 6 shades that form the color wheel, and each of them has additional colors(blue and red-violet, yellow-green, purple, red and yellow-orange, blue and yellow-green). Newton, by the way, identified 7 colors, adding blue to the spectrum, which, along with the six main ones, is considered the color of the rainbow. Mixing these shades, making them into varying degrees darker or lighter, you can get a full range of colors.

I would like to immediately make a reservation that the division of the spectrum is arbitrary and depends on the characteristics of our perception. A person can identify up to 1000 tones in the color spectrum. It is interesting that reptiles and birds do not distinguish between blue shades, and some fish see everything around them in red. It is believed that for cats the environment around us colorful world looks duller, but they distinguish a huge variety of shades of gray.

Color spectrum table

The colors of the spectrum are called chromatic, as opposed to achromatic (from Latin, “without color”): white, black, gray. The order of shades in the spectrum is always the same, starting with red and ending with violet.

Shades on the color wheel from green-blue to blue-violet are considered cool, from yellow-green to red-violet - warm. This division is quite arbitrary and depends on what associations these colors evoke in us: red-orange fire, yellow sun, blue ice, blue ocean abyss. Did you notice that when we separated colors we didn't mention green? And this is no coincidence. Pure green (which, by the way, is extremely rare) is considered neutral. A drop of yellow makes it warmer, a drop of blue cools it down.

The color wheel is extremely important in a designer's work. With its help, you can not only determine harmonious color combinations, create the desired atmosphere in the room or an attractive image, but also influence perception by skillfully emphasizing the brightness, purity, beauty of color, enhance its intensity by adding complementary shades, balance cold tones with warm ones, etc. d. This magic is not difficult to learn even without being a designer, and it can be used not only in interior or clothing design. With the help of the color wheel, anyone can create harmony in the apartment, correctly combine colors in clothes, manicure, makeup, etc. For example, Blue eyes orange-coral lipstick or peach eyeshadow will highlight the look, and a scarlet dress will be refreshed by a green-turquoise scarf.

When decorating the surfaces of walls, furniture and other objects with paint, the question arises of mixing them to obtain the desired color. Not always available in stores desired color or shade, so you can use the mixing table. Creating color by hand from scrap paints is also cost-effective.

Features when working with acrylic paints

Acrylic paints are an inexpensive material that is easy to work with and dries relatively quickly. But the disadvantage is the narrow palette of colors, so you need to create the desired shade manually. You can get burgundy, lilac, turquoise, sand, wenge, lilac, and others by mixing colors.

There are some rules when working with acrylic:

1. The surface to be painted must be smooth, clean, free of oil and grease stains. It must first be cleaned of the previous finish. It is not recommended to apply a new coat of paint over an old one;
2. Before painting, the walls must be leveled with putty, and then several layers of primer must be applied. The primer is used for better adhesion of paint and for less paint consumption;
3. Before use, acrylic must be diluted with water or special solvents, but it is better to do this in a separate container with a portion of paint. This is necessary in order not to spoil the entire volume at once, but to use only as much as needed.
4. After use, used rollers and brushes must be rinsed thoroughly with water, otherwise they will become unsuitable for further work. You also need to wash other tools that were used. The top of the paint bucket needs to be wiped down so that the lid can be opened in the future.
5. Most often, painting occurs in 2-3 stages, and for effective result, this must be done in one direction. To simplify and speed up the work, you can take a spray bottle.

Important! Also, do not forget about precautions; before work, it is better to cover or seal all places and objects that will not be painted. You can work with the material at temperatures not lower than 5 degrees and not higher than 27 degrees.

Another main rule of application is to use paint first on a small area or a completely separate surface. When creating the desired shade, it is better to try it on a draft. You also need to wait until it dries completely, as after that the color becomes a little darker or lighter, depending on the type of paint. And if the color matches the expected desired result, then you can start painting the surface or decorating objects.

What colors should you buy?

Tinting is the name of the science that studies mixing styles and obtaining the desired shade. It is this science that helps to obtain lilac color, as well as fuchsia, ivory, sea wave or sea when mixing colors. In theory, to create many colors, it is enough to have yellow, red and blue. But in this case, you can get a narrow spectrum.

To create a wide palette, it is enough to buy the following colors:

• Red;
• Yellow;
• Brown;
• Pink;
• Blue;
• Black;
• White.

These colors are quite sufficient for applying the basic scales. For decoration Gold, silver, mother-of-pearl and other additional colors are also used for designs.

Mixing Features

You can find out how to mix correctly and get the desired shade by consulting with a specialist in the store when purchasing.

Tip: The main rule of mixing is that you cannot combine dry and liquid colors. They don't match.

There are 4 main colors - white, red, blue and green. With their help, many others can be achieved. For example, khaki can be obtained by mixing brown and green. And you can get a brown color by mixing from red and green. Beige – take brown and white.

Working with a table

Working with the table is to find the desired color and shade, and next to it in the line, the necessary colors for mixing will be indicated. For example, get a purple color when mixed acrylic paints, possible by mixing red and blue. And to make it light or dark, just add a little white or black color, respectively. The disadvantage of working from the table is that it does not indicate the amount of pigment added - the ratio. Therefore, when mixing, you need practice and color perception.

Here you can simply take and mix colors, first in the same proportion, and then add another for the desired shade. Or use specialized tables that have been developed by specialists for working with the material.

For example, to get Orange color When mixing acrylic paints, just mix red and yellow.

Color mixing chart for acrylic paints

Image	Color name	Required colors
	Grey	White and black
	Plum	Red, blue, black
	Light green	Yellow, white and green
	Dark-blue	Blue and black
	Bordeaux	Red, brown, yellow, black
	Dark green	Green and black
	Orange	Red and yellow

Working with paints is simple, the only difficulty is creating the desired shade, without proportions. But, if you understand the mixing table and practice, and also know the rules of working with acrylic, you can create a unique and inimitable interior design with your own hands and relatively cheaply.